Do Not Buy Into These "Trends" Concerning Repairs To Upvc Windows
Do Not Buy Into These "Trends" Concerning Repairs To Upvc Windows
Blog Article
Repairs to uPVC Windows
uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like timber and aluminum.
It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce costly repairs and increase energy efficiency.
1. Broken Glass
If the glass in your window is damaged, it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. It is important to make sure that your windows are in good shape.
For single pane windows it is relatively easy to replace them, and the replacement will usually fit inside the old frame very easily. If you have double-paned windows which are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.
If you are going to attempt to remove the glass panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric and not on the floor which could cause them to be trampled.
After the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the gap is large, you might want to consider using the security door with an integrated window, as it offers the best of both worlds.
2. Sagging
uPVC is a durable and energy efficient alternative to timber sash windows. In time, they could be affected by a variety of issues that include sagging. A sagging window in uPVC can cause issues with light, draughts and even security. It's crucial to act as soon as you realize that your uPVC windows are sagging.
To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows so you can access the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you are happy with the fit of the window, you can tighten screws to hold them in the right position.
If you can't reposition the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out and cause them to loosen. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are waterproof and secure from draughts.
UPVC handles can also become loose. The majority of the time this is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and then perform a test fit. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.
3. Water Leaks
If you're waking up to wet floors and mouldy walls every time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or not present.
It is a fairly easy fix that can be completed by any competent DIYer. Depending on how severe the issue is, old caulking might need to be removed. When it is time to uPVC repair, you must be careful not to over-caulk. This will only make your window harder to clean and decrease its energy efficiency.
It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious cases, you may need to replace the window.
Mold spots and rotted sills are other signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.
If the leakage is occurring between the double-glazed glass it is more likely that the issue is more with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
Hinges may be to blame for the reason that your uPVC window is difficult to open or if it opens in the breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.
Like any mechanical component, hinges can be damaged over time. The process of replacing a hinge on a window is essentially a simple process, but it's easier when you have a person to help you hold the frame up.
It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.
The problem with the hinges on windows could be caused by improperly opening the window a certain manner or because of improper installation in the factory. Sending us photos via our website will often resolve the problem. We are happy to give suggestions.
Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It also decreases the possibility of a window getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.
5. Draughts
Draughts can be caused by several different causes. The hinges can also become unbalanced due to wear, which can cause a gap where the sash meets frame. If they are beyond repair, it might be required to realign them. The interlock may be disaligned. This happens on the hinge's side and might require to be cleaned. In some instances, it may be necessary to replace them.
These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be avoided by replacing here them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and again will lessen the risk of draughts.
One of the most effective ways to cut down on draughts is by using a draught excluder, these are typically fabric tubes that are filled with some sort of filler and can be put on top of your windowsill. They will help stop cold air from entering and keep your home warm and cosy!
The windows made of upvc can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it could be more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your upvc window it is recommended to speak with an expert as soon as possible.